Controllers/Drivers

Controllers/Drivers
Controller/Step Data Input Type LECP6/LECA6
 
・The controller is already set with the data of the actuator.
  (The actuator and controller are provided as a set.)
・Easy operation and simple setting: Easy mode, Detail setting: Normal mode
・Teaching box, controller setting software

Download :

            



Step Motor Controller with Step Data Teaching Function
LECP6-XB120

 
・Neither a PC nor a teaching box is required
 for adjusting the position of step data.
・With a JOG function for parallel input signals

Download :

                     



Multi-Axis Step Motor Controller JXC73/83/92/93
 
・Speed tuning control
・Linear/circular interpolation
・Positioning/pushing operation
・Absolute/relative position coordinate instructions
・Step data input (Max. 2048 points)
・Space saving, reduced wiring

Download :

            



Programless Controller LECP1
 
・No programming required
 Capable of setting up an electric actuator operation without using a PC or teaching box
・Speed/acceleration 16-level adjustment
・Compatible with actuators with locks
・3-level pushing force settings

Download :

            



Programless Controller (With Stroke Study) LECP2
 
・End to end operation similar to an air cylinder
・Positioning of 2 stroke end points + 12 intermediate points

Download :

               



Step Motor Driver (Pulse Input Type) LECPA
 
・A driver that uses pulse signals to allow positioning at any position
 The actuator can be controlled from the customers' positioning unit.
・Return-to-origin command signal
・With force limit function (Pushing force/Gripping force operations are available.)

Download :

            



Step Motor Controller/CC-Link Direct Input Type LECPMJ
 
・CC-Link Ver. 1.10 compatible
・External data import function
・Position and speed can be monitored by the PLC touch panel (display).
・Step data can be edited from the PLC touch panel (display).

Download :

            



Step Motor Controller JXCE1/91/P1/D1/L1
 
・EtherCAT™, EtherNet/IP™, PROFINET compatible, DeviceNet™
・Two types of operation command
 Step no. defining operation, Numerical data defining operation
・Transition wiring of communication cable
・Numerical monitoring available
・IO-Link communication can be performed.

Download :

             



Fieldbus-compatible Gateway (GW) Unit LEC-G
 
・The LEm series electric actuators are applicable to Fieldbus protocols.
・Conversion unit for Fieldbus network and LEC serial communication
・2 methods of operation:
 Step data input, numerical data input
・Position, speed, and other. values can be checked on the PLC.

Download :

             



AC Servo Motor Controller (Pulse Input Type) LECS
 
・Pulse input type motor driver
・Compatible motor capacity: 100 W, 200 W, 400 W
・Compatible encoders:
 Incremental type
 Absolute type
・Servo adjustment using auto gain tuning
・With display setting function

Download :

             



AC Servo Motor Driver (MECHATROLINK Compatible) LECYM/LECYU
 
・Position control, speed control, and torque control can be used.
・Control encoder: Absolute 20-bit encoder
 (Resolution: 1048576 p/rev)
・Applicable Fieldbus protocol: MECHATROLINK-2, MECHATROLINK-3

Download :

                               



สินค้ามีจำหน่าย และพร้อมจัดส่ง  สามารถสอบถามข้อมูลสินค้ากับเราได้ทันที
ลูกค้าสามารถเลือกสินค้าที่ต้องการจากทุกหมวดหมู่ ซึ่งได้แบ่งไว้ตามประเภทสินค้า
จากนั้นสามารถติดต่อกับทางบริษัทเพื่อสั่งสินค้า หรือขอคำแนะนำเพิ่มเติมเกี่ยวกับสินค้าชนิดต่างๆ ได้

Visitors: 17,428